2023 Iron Bull Trailers DWB14 83x16

2023 Iron Bull Trailers DWB14 83x16

Swipe to View More

  • Year 2023
  • Make Iron Bull Trailers
  • Model DWB14
2023 Iron Bull Trailers DWB14 83x16

2023 Iron Bull Trailers DWB14 83x16

2023 Iron Bull Trailers DWB14 83x16

Our DWB dump trailer brings 8” monoframe I-beam construction into the fold, making the unit 2” shorter than our standard DTB. Built with the same rugged user in mind as our DTB model, The DWB comes in standard configurations only, but should have all the options to satisfy the needs of any serious Dump user.

The models include a beefy 8” I-beam frame, 7-gauge floors, 24" 10 gauge sides with 7 machined brakes that will not bend, bow, or buckle even under the most demanding conditions. An supersized locking front toolbox with a divider ensures ample storage that will not interfere with your pump or battery. The front is capped off with a reinforced 2 5/16” coupler and standard 10k jack. A three way gate will ensure maximum flexibility for transport and dumping, while the standard tarp will make sure your loads make it to their destination. D-rings, Y-hooks, and stake pockets are also thrown in for multiple tie-down options.

This model also comes equipped with slide-in ramps, 7k electric brake axles, radial tires, and a 5 amp wall charger. 5/16 cylinder scissor hoists give you maximum lift power. All lights are sealed lifetime LEDs, and all trailers are equipped with sealed wire harnesses. These units are also backed by our industry-best IronClad warranty which covers every unit with a three year structural, two year component warranty, and two years free roadside assistance. So grab a bull by the horns and hook up to a DWB today.

Features may include:

  • 8” I-Beam Frame & Tongue (10 lbs/ft )
  • 4” Tubing Bed Frame
  • One piece 7 Gauge Steel Flooring *
  • 3 x 3/16” Channel Crossmembers
  • Full Length Bed Runners and Ramp Pockets
  • 10 Gauge 18" or 24" Steel Sides
  • Super-Sized Front Toolbox
  • Standard Retractable Tarp Kit
  • Weld On Diamond Plate Fenders
  • 10k Drop-Leg Jack
  • 3-Way Spreader Gate
  • 2 5/16” Adjustable Coupler
  • Cambered Brake Axles
  • Multi-leaf Slipper Spring Suspension
  • Black Mod Wheels *
  • Radial Tires
  • Spare Tire Mount
  • Rear Support Stand Bracket
  • Three-Way Spreader Gate
  • Powdura Powder Coat & One Cure Primer
  • Scissor Hoist with 516 Cylinder
  • Double Acting Pump Unit w/ Gravity Down
  • Flow Control Valve
  • Locking Pump Box
  • Standard Stake Pockets
  • 4 Floor Mounted 5/8” D-Rings
  • DOT Approved Lighting
  • Lifetime LED Lighting
  • Molded Sealed Harness with Resistors
  • LED Voltage Indicater in Remote
  • Built-In 5 amp Battery Charger
  • 7-Way Receiver Female Plug with Adapter
  • Weld-On 3/8” Safety Chains

Dimensions

Length 16'
Width 83"
Deck Height 29"
Depth, Maximum 24"

Chassis

Axle Count 2
Chassis Tongue: 8" I-Beam

Capacities

Axle Capacity, Rear 7,000 lb.
Cargo Capacity 7.2 Cu yards

Wheels & Tires

Tires, Rear Specification 235/80R16
Wheels 8 Holes

Weights

Weight 5,250 lbs.
GVWR 14,000 lb

Product Photography