Selling Price -
2024 SANY® Wheel Loaders SW405K
The SW405K features a reinforced structural design that’s built to take on the toughest work, including heavy-duty mining operations. It offers an impressive service life reaching 10,000 hours, and boasts a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The high-pressure, load sensing hydraulics provide a balance of speed and power. The Z-bar linkage design delivers 40,466 lbf of breakout force.
Features may include:
- The 228-net horsepower with almost 40,000 lbs of breakout force and bucket capacity of 4 cubic yards
- Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.
- Keep more material in the bucket with the SANY boom suspension
- Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes
FOB Duncan, SC
- 2024
- SANY®
- Wheel Loaders
- SW405K
- Compact
- TCD6.1
- Deutz
- Gross: 262 HP | Net: 228 HP
- Gross: 965 lbs ft
- 476 in3
- Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–16 mph
- Service Brakes: Wet disc | Parking Brake: Disk Brake
- Breakout Force: 40,466 lbf | Tipping Load Straight: 31,967 lbs | Tipping Load @ Full Term: 28,881 lbs | Reach at Max. Lift and 45º Discharge: (3' 11")
- Raise: 5.4 sec | Dump: 1.9 sec | Float Down: 3.3 sec | Total Cycle Time: 10.6 sec
- Max: 81 GP
- Max: 4,061 PSI
- Center Line of Rear Axle to Edge of Counterweight: 2,335 mm (7' 8") | Center Line of Front Axle to Center Pivot: 1,600 mm (5' 3") | Dump Clearance at Max. Lift : 3,090 mm (10' 2") | Reach at Max. Lift and 45º Discharge: 1,185 mm (3' 11") | Roll Back at Max. Lift: 58º | Dump Angle at Max. Lift and Dump: 45º | Roll Back at Ground: 45º | Tail Angle to the Rear Wheel: 27º | Clearance Circle to Outside of Tires: 5,911 mm (19' 5") | Clearance Circle to Counterweight: 6,465 mm (21' 3") | Max. Circle: 5,969 mm (19' 7") | Articulation Angle: +/- 40º
- Full lift 45º dump: 10' 2" | 430 mm (1' 5")
- To Top of Cab: 3,580 mm (11' 9") | Max Dump: 5,415 mm (17' 9") | Hinge Pin at Max. Lift: 4,145 mm (13' 7") | Roll Back at Carry: 50º
- 3,200 mm (10' 6")
- Shipping without Attachments: 7,040 mm (23' 1") | Shipping with Bucket: 8,180 mm (26' 10")
- Dig Level Bucket: 30 mm (1.2")
- 2,200 mm (7' 3")
- Tank: 79.3 gal
- 11.4 gal
- Crankcase: 6.1 gal | DEF tank: 5.3 gal
- 7.4 gal
- 7.4 gal
- Tank: 76.6 gal
- Front Axle: Fixed | Traction Aid: Manual Differential Lock | Rear Axle: Oscillating | Traction Aid: Open Differential
- Operating: 40,786 lbs
- SW4055CEM0768
- Monroe, North Carolina
- New
- 005180
- 2024
- SANY®
- Wheel Loaders SW405K
- TCD6.1
- 5
- Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–16 mph
- Available
- 2,200 mm (7' 3")
- To Top of Cab: 3,580 mm (11' 9") | Max Dump: 5,415 mm (17' 9") | Hinge Pin at Max. Lift: 4,145 mm (13' 7") | Roll Back at Carry: 50º
- SW4055CEM0768